Probleme mit Linux

[custor86]

Da ich heute mal wieder etwas zu viel Zeit hatte hab, ich mal just for fun OpenSUSE 11.3 mit KDE auf meinen alten Laptop installiert.
Die Installation lief auch Problemlos, Die Programme zB Open Office starten auch recht zügig.
Nur alles was mit dem Internet zusammenhängt ist unsagbar langsam, obwohl der Laptop mit Kabel direkt am Router hängt. Bis Firefox eine Seite galden hat vergeht eine kleine Ewigkeit. Ich fühle mich regelrecht in Zeiten von 56K Modems zurückversetzt wenn ich auf eine Seite mit vielen Bildern oder Skripten will.

Ich versuche auch schon den ganzen Morgen OpenSUSE zu updaten und es will nicht klappen.
Zuerst hat es ca 45 min nach gedauert bis die Meldung kahm, dass ein Update gefunden wurde.
Als ich dann auf Installieren geklickt hatte, kahm ein Bildschirm, dass der Download erfolgt.
Nach ca 2 Stunden war der Downloadstatus noch immer bei 0%. Ich hab dann abgebrochen und wollte es später nochmal versuchen.
Jetzt sucht es schon wieder seit ca 1 Stunde nach den Update und hat noch immer nichts gefunden.

Weiß einer von euch woran das liegen könnte? Liegts am Netzwerktreiber oder macht mir da der Router Probleme?

[MrTom]

Es könnte sein, jenachdem welche Netzwerkkarte du hast, dass es dort Probleme mit dem Modul gibt. Aber um da genaueres zu sagen bräuchte man Infos über die Hardware. Gib mal in eine Konsole "lspci -v" ein und poste was da für eine Ausgabe kommt.

Mal ganz nebenbei find ich OpenSuse scheiße aber das liegt auch daran, dass ich lieber viel selber einrichte damit ich weiß was wann wo gestartet wird. Das macht ja ubuntu und openSuse fast alles alleine.

Ansonsten könnte das auch an der Firewall liegen oder den Netzwerkeinstellungen im Netzwerkmanager.

[custor86]

So hab das Ganze mal gemacht und es kommt diese Meldung:

Absolute path to 'lspci' is '/sbin/lspci', so running it may require superuser privileges (eg. root).

Dies sind übrigens meine ersten Schritte mit Linux. Ich hab bis jetzt nicht die Zeit gehabt um mich damit auseinanderzusetzten.
Jetzt wo ich aber noch meinen alten Labptop Übrig hatte wollte ich mich mal reinschnuppern.
OpenSUSE hab ich einfach genommen, weil ich zuerst darüber gestolpert bin.
Hab mich dann für die Benutzeroberfläche für KDE entschieden, da OpenSUSE und KDE starkt verknüpft sind.

[MrTom]

Ja für den Anfang ist OpenSuse bzw. Ubuntu nicht schlecht.

dann schreib mal "sudo lspci -v" und wenn er nach einem Password fragt, musst du dein Loginpassword eingeben.

[custor86]

Hab ich gemacht, die Passwortabfrage ist auch gekommen, ich hab dann mein PW eingegeben als Antwort kahm aber nur: command not found

Dachte ich hab mich beim PW vertippt und wollte es wiederholen, wenn ich aber jetzt wieder "sudo lspci -v" eingebe, kommt immer nur die Meldung "command not found"
Kein Plan was da los ist , bin gerade verwirrt, warum ich nichtmehr zur PW eingabe komme.

Edit: wenn ich ne Weile warte kann ich das Passwort wieder eingeben. Jedoch kommt immer nach der Eingabe Command not found.
Oder muss ich vor dem Passwort noch was drücken? Wenn ich das Passwort eingebe bewegt sich der Coursor gar nicht. Es erscheinen auch keine Sternchen oder sonst irgendwelche Zeichen, oder ist das normal?

[MrTom]

Das ist alles normal, der speichert deine Eingabe des pw kurzzeitig und somit muss man dann nicht jedesmal das pw eingeben. Die Eingabe des pw wird nicht angezeigt ja.

Mh scheinbar gibt es bei deinem Linux den Befehl lspci nicht

Ok dann mal was anderes. Versuch mal den Befehl "dmesg"

[custor86]

Jetzt kommt ne riesige Auflistung

EDIT: Hab das ganze mal kopiert:

Spoiler for Hiden:

Michael@linux-yzb5:~> dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.34-12-default (geeko@buildhost) (gcc version 4.5.0 20100604 [gcc-4_5-branch revision 160292] (SUSE Linux) ) #1 SMP 2010-06-29 02:39:08 +0200
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000d8000 - 00000000000e0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003fef0000 (usable)
[    0.000000]  BIOS-e820: 000000003fef0000 - 000000003fefc000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003fefc000 - 000000003ff00000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003ff00000 - 000000003ff80000 (usable)
[    0.000000]  BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!
[    0.000000] DMI present.
[    0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x3ff80 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back                                                                                   
[    0.000000]   1 base 03FF80000 mask FFFF80000 uncachable                                                                                   
[    0.000000]   2 base 03FF80000 mask FFFF80000 uncachable                                                                                   
[    0.000000]   3 disabled                                                                                                                   
[    0.000000]   4 disabled                                                                                                                   
[    0.000000]   5 disabled                                                                                                                   
[    0.000000]   6 disabled                                                                                                                   
[    0.000000]   7 disabled                                                                                                                   
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106                                                               
[    0.000000] e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)                                                 
[    0.000000] Scanning 1 areas for low memory corruption                                                                                     
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000001000 (reserved)
[    0.000000]  modified: 0000000000001000 - 0000000000002000 (usable)
[    0.000000]  modified: 0000000000002000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009f800 (usable)
[    0.000000]  modified: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000d8000 - 00000000000e0000 (reserved)
[    0.000000]  modified: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000003fef0000 (usable)
[    0.000000]  modified: 000000003fef0000 - 000000003fefc000 (ACPI data)
[    0.000000]  modified: 000000003fefc000 - 000000003ff00000 (ACPI NVS)
[    0.000000]  modified: 000000003ff00000 - 000000003ff80000 (usable)
[    0.000000]  modified: 000000003ff80000 - 0000000040000000 (reserved)
[    0.000000]  modified: 00000000ffb80000 - 00000000ffc00000 (reserved)
[    0.000000]  modified: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000] initial memory mapped : 0 - 00c00000
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 15000-1a000
[    0.000000] RAMDISK: 3752a000 - 37ff0000
[    0.000000] Allocated new RAMDISK: 009f6000 - 014bb3ea
[    0.000000] Move RAMDISK from 000000003752a000 - 0000000037fef3e9 to 009f6000 - 014bb3e9
[    0.000000] ACPI: RSDP 000f6d20 00014 (v00 PTLTD )
[    0.000000] ACPI: RSDT 3fef65bc 00028 (v01 PTLTD    RSDT   06040000  LTP 00000000)
[    0.000000] ACPI: FACP 3fefbf8c 00074 (v01 INTEL  845M     06040000 PTL  0000004B)
[    0.000000] ACPI: DSDT 3fef65e4 059A8 (v01 COMPAL 845M     06040000 MSFT 0100000E)
[    0.000000] ACPI: FACS 3fefcfc0 00040
[    0.000000] 135MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000001 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0003ff80
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[4] active PFN ranges
[    0.000000]     0: 0x00000001 -> 0x00000002
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0003fef0
[    0.000000]     0: 0x0003ff00 -> 0x0003ff80
[    0.000000] On node 0 totalpages: 261888
[    0.000000] free_area_init_node: node 0, pgdat c0882580, node_mem_map c14bd020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3952 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 272 pages used for memmap
[    0.000000]   HighMem zone: 34402 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[    0.000000] APIC: disable apic facility
[    0.000000] APIC: switched to apic NOOP
[    0.000000] nr_irqs_gsi: 16
[    0.000000] early_res array is doubled to 64 at [16000 - 167ff]
[    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000010000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d8000
[    0.000000] PM: Registered nosave memory: 00000000000d8000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
[    0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bfb80000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @c2000000 s34260 r0 d23084 u4194304
[    0.000000] pcpu-alloc: s34260 r0 d23084 u4194304 alloc=1*4194304
[    0.000000] pcpu-alloc:

• 0

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259840
[    0.000000] Kernel command line: root=/dev/disk/by-id/ata-TOSHIBA_MK2018GAP_X2HA8014T-part2 resume=/dev/disk/by-id/ata-TOSHIBA_MK2018GAP_X2HA8014T-part1 splash=silent quiet vga=0x317
[    0.000000] bootsplash: silent mode.
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] Subtract (43 early reservations)
[    0.000000]   #1 [0000001000 - 0000002000]   EX TRAMPOLINE
[    0.000000]   #2 [0000200000 - 00009f1b04]   TEXT DATA BSS
[    0.000000]   #3 [000009f800 - 0000100000]   BIOS reserved
[    0.000000]   #4 [00009f2000 - 00009f5101]             BRK
[    0.000000]   #5 [0000010000 - 0000011000]      TRAMPOLINE
[    0.000000]   #6 [0000011000 - 0000015000]     ACPI WAKEUP
[    0.000000]   #7 [0000015000 - 0000016000]         PGTABLE
[    0.000000]   #8 [00009f6000 - 00014bc000]     NEW RAMDISK
[    0.000000]   #9 [00014bc000 - 00014bd000]         BOOTMEM
[    0.000000]   #10 [00014bd000 - 0001cbd000]         BOOTMEM
[    0.000000]   #11 [0001cbd000 - 0001cbd004]         BOOTMEM
[    0.000000]   #12 [0001cbd040 - 0001cbd100]         BOOTMEM
[    0.000000]   #13 [0001cbd100 - 0001cbd154]         BOOTMEM
[    0.000000]   #14 [0001cbd180 - 0001cc0180]         BOOTMEM
[    0.000000]   #15 [0001cc0180 - 0001cc0190]         BOOTMEM
[    0.000000]   #16 [0001cc01c0 - 0001cc0dc0]         BOOTMEM
[    0.000000]   #17 [0001cc0dc0 - 0001cc0f48]         BOOTMEM
[    0.000000]   #18 [0001cc0f80 - 0001cc0fc0]         BOOTMEM
[    0.000000]   #19 [0001cc0fc0 - 0001cc1000]         BOOTMEM
[    0.000000]   #20 [0001cc1000 - 0001cc1040]         BOOTMEM
[    0.000000]   #21 [0001cc1040 - 0001cc1080]         BOOTMEM
[    0.000000]   #22 [0001cc1080 - 0001cc10c0]         BOOTMEM
[    0.000000]   #23 [0001cc10c0 - 0001cc1100]         BOOTMEM
[    0.000000]   #24 [0001cc1100 - 0001cc1140]         BOOTMEM
[    0.000000]   #25 [0001cc1140 - 0001cc1180]         BOOTMEM
[    0.000000]   #26 [0001cc1180 - 0001cc11c0]         BOOTMEM
[    0.000000]   #27 [0001cc11c0 - 0001cc1200]         BOOTMEM
[    0.000000]   #28 [0001cc1200 - 0001cc1240]         BOOTMEM
[    0.000000]   #29 [0001cc1240 - 0001cc1250]         BOOTMEM
[    0.000000]   #30 [0001cc1280 - 0001cc1290]         BOOTMEM
[    0.000000]   #31 [0001cc12c0 - 0001cc1356]         BOOTMEM
[    0.000000]   #32 [0001cc1380 - 0001cc1416]         BOOTMEM
[    0.000000]   #33 [0002000000 - 000200e000]         BOOTMEM
[    0.000000]   #34 [0001cc3440 - 0001cc3444]         BOOTMEM
[    0.000000]   #35 [0001cc3480 - 0001cc3484]         BOOTMEM
[    0.000000]   #36 [0001cc34c0 - 0001cc34c4]         BOOTMEM
[    0.000000]   #37 [0001cc3500 - 0001cc3504]         BOOTMEM
[    0.000000]   #38 [0001cc3540 - 0001cc35f0]         BOOTMEM
[    0.000000]   #39 [0001cc3600 - 0001cc36a8]         BOOTMEM
[    0.000000]   #40 [0001cc36c0 - 0001cc76c0]         BOOTMEM
[    0.000000]   #41 [0001cc76c0 - 0001d476c0]         BOOTMEM
[    0.000000]   #42 [0001d476c0 - 0001d876c0]         BOOTMEM
[    0.000000] Initializing HighMem for node 0 (000377fe:0003ff80)
[    0.000000] Memory: 1019280k/1048064k available (3848k kernel code, 28272k reserved, 2861k data, 408k init, 138696k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffd33000 - 0xfffff000   (2864 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc088e000 - 0xc08f4000   ( 408 kB)
[    0.000000]       .data : 0xc05c20f0 - 0xc088d8a8   (2861 kB)
[    0.000000]       .text : 0xc0200000 - 0xc05c20f0   (3848 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:2304 nr_irqs:256
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1694.950 MHz processor.
[    0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 3389.90 BogoMIPS (lpj=6779800)
[    0.004125] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
[    0.004254] Security Framework initialized
[    0.004289] AppArmor: AppArmor initialized
[    0.004325] Mount-cache hash table entries: 512
[    0.004576] Initializing cgroup subsys ns
[    0.004589] Initializing cgroup subsys cpuacct
[    0.004598] Initializing cgroup subsys memory
[    0.004620] Initializing cgroup subsys devices
[    0.004627] Initializing cgroup subsys freezer
[    0.004633] Initializing cgroup subsys net_cls
[    0.004638] Initializing cgroup subsys blkio
[    0.004711] CPU0: Hyper-Threading is disabled
[    0.004721] mce: CPU supports 4 MCE banks
[    0.004753] Performance Events: no PMU driver, software events only.
[    0.004771] Checking 'hlt' instruction... OK.
[    0.020780] SMP alternatives: switching to UP code
[    0.033889] Freeing SMP alternatives: 28k freed
[    0.034060] Unpacking initramfs...
[    0.562176] Freeing initrd memory: 11032k freed
[    0.578420] ACPI: Core revision 20100121
[    0.600130] weird, boot CPU (#0) not listed by the BIOS.
[    0.600136] SMP motherboard not detected.
[    0.600141] Local APIC not detected. Using dummy APIC emulation.
[    0.600145] SMP disabled
[    0.600494] Brought up 1 CPUs
[    0.600503] Total of 1 processors activated (3389.90 BogoMIPS).
[    0.601027] devtmpfs: initialized
[    0.601712] regulator: core version 0.5
[    0.601783] regulator: dummy:
[    0.601808] Time: 10:53:31  Date: 03/01/11
[    0.601931] NET: Registered protocol family 16
[    0.602166] ACPI: bus type pci registered
[    0.622616] PCI: PCI BIOS revision 2.10 entry at 0xfd9a4, last bus=2
[    0.622623] PCI: Using configuration type 1 for base access
[    0.624095] bio: create slab <bio-0> at 0
[    0.626951] ACPI: EC: Look up EC in DSDT
[    0.633416] ACPI: Interpreter enabled
[    0.633441] ACPI: (supports S0 S3 S4 S5)
[    0.633488] ACPI: Using PIC for interrupt routing
[    0.654196] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[    0.655396] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[    0.655408] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.656848] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.659514] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.659523] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.659529] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.659536] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[    0.659542] pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[    0.659549] pci_root PNP0A03:00: host bridge window [mem 0x000e0000-0x000e3fff] (ignored)
[    0.659556] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored)
[    0.659601] pci 0000:00:00.0: reg 10: [mem 0xec000000-0xefffffff pref]
[    0.659772] pci 0000:00:1d.0: reg 20: [io  0x1860-0x187f]
[    0.659844] pci 0000:00:1d.1: reg 20: [io  0x18c0-0x18df]
[    0.659916] pci 0000:00:1d.2: reg 20: [io  0x1800-0x181f]
[    0.660102] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH4 ACPI/GPIO/TCO
[    0.660111] pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH4 GPIO
[    0.660149] pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
[    0.660160] pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
[    0.660172] pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
[    0.660183] pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
[    0.660194] pci 0000:00:1f.1: reg 20: [io  0x1820-0x182f]
[    0.660205] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
[    0.660277] pci 0000:00:1f.3: reg 20: [io  0x1840-0x185f]
[    0.660326] pci 0000:00:1f.5: reg 10: [io  0x1c00-0x1cff]
[    0.660337] pci 0000:00:1f.5: reg 14: [io  0x1880-0x18bf]
[    0.660403] pci 0000:00:1f.6: reg 10: [io  0x2400-0x24ff]
[    0.660414] pci 0000:00:1f.6: reg 14: [io  0x2000-0x207f]
[    0.660504] pci 0000:01:00.0: reg 10: [mem 0xf0000000-0xf7ffffff pref]
[    0.660515] pci 0000:01:00.0: reg 14: [io  0x3000-0x30ff]
[    0.660525] pci 0000:01:00.0: reg 18: [mem 0xe8100000-0xe810ffff]
[    0.660548] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.660578] pci 0000:01:00.0: supports D1 D2
[    0.660629] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.660637] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.660644] pci 0000:00:01.0:   bridge window [mem 0xe8100000-0xe81fffff]
[    0.660652] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf7ffffff pref]
[    0.660703] pci 0000:02:00.0: reg 10: [mem 0xe8204000-0xe82047ff]
[    0.660715] pci 0000:02:00.0: reg 14: [mem 0xe8200000-0xe8203fff]
[    0.660769] pci 0000:02:00.0: supports D1 D2
[    0.660774] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
[    0.660782] pci 0000:02:00.0: PME# disabled
[    0.660827] pci 0000:02:04.0: reg 10: [mem 0x00000000-0x00000fff]
[    0.660854] pci 0000:02:04.0: supports D1 D2
[    0.660858] pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.660866] pci 0000:02:04.0: PME# disabled
[    0.660912] pci 0000:02:08.0: reg 10: [mem 0xe8205000-0xe8205fff]
[    0.660923] pci 0000:02:08.0: reg 14: [io  0x4000-0x403f]
[    0.660975] pci 0000:02:08.0: supports D1 D2
[    0.660980] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.660987] pci 0000:02:08.0: PME# disabled
[    0.661032] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
[    0.661041] pci 0000:00:1e.0:   bridge window [io  0x4000-0x4fff]
[    0.661050] pci 0000:00:1e.0:   bridge window [mem 0xe8200000-0xe82fffff]
[    0.661059] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.661066] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.661072] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[    0.661124] pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-02]
[    0.661144] pci_bus 0000:00: on NUMA node 0
[    0.661161] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.661277] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[    0.661331] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    0.668048] ACPI: PCI Interrupt Link [LNKA] (IRQs *9)
[    0.668364] ACPI: PCI Interrupt Link [LNKB] (IRQs *9)
[    0.668649] ACPI: PCI Interrupt Link [LNKC] (IRQs *9)
[    0.668929] ACPI: PCI Interrupt Link [LNKD] (IRQs *9)
[    0.669209] ACPI: PCI Interrupt Link [LNKE] (IRQs *9)
[    0.669455] ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.
[    0.669713] ACPI: PCI Interrupt Link [LNKG] (IRQs 9) *0, disabled.
[    0.669960] ACPI: PCI Interrupt Link [LNKH] (IRQs 9) *0, disabled.
[    0.670325] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.670336] vgaarb: loaded
[    0.670546] PCI: Using ACPI for IRQ routing
[    0.670557] PCI: pci_cache_line_size set to 64 bytes
[    0.670652] reserve RAM buffer: 0000000000002000 - 000000000000ffff
[    0.670659] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[    0.670665] reserve RAM buffer: 000000003fef0000 - 000000003fffffff
[    0.670672] reserve RAM buffer: 000000003ff80000 - 000000003fffffff
[    0.670880] NetLabel: Initializing
[    0.670886] NetLabel:  domain hash size = 128
[    0.670890] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.670913] NetLabel:  unlabeled traffic allowed by default
[    0.670943] Switching to clocksource tsc
[    0.672000] AppArmor: AppArmor Filesystem Enabled
[    0.672000] pnp: PnP ACPI init
[    0.672000] ACPI: bus type pnp registered
[    0.686009] pnp: PnP ACPI: found 12 devices
[    0.686018] ACPI: ACPI bus type pnp unregistered
[    0.686026] PnPBIOS: Disabled by ACPI PNP
[    0.686063] system 00:04: [io  0x0600-0x060f] has been reserved
[    0.686070] system 00:04: [io  0x0700-0x070f] has been reserved
[    0.686076] system 00:04: [io  0x1000-0x107f] has been reserved
[    0.686083] system 00:04: [io  0x1180-0x11bf] has been reserved
[    0.686089] system 00:04: [io  0x1200-0x120f] has been reserved
[    0.686097] system 00:04: [io  0xfe00-0xfe01] has been reserved
[    0.686105] system 00:04: [mem 0xfebffc00-0xfebfffff] has been reserved
[    0.686112] system 00:04: [mem 0xfff80000-0xffffffff] has been reserved
[    0.721307] pci 0000:00:1e.0: BAR 15: assigned [mem 0x40000000-0x43ffffff pref]
[    0.721318] pci 0000:00:1f.1: BAR 5: assigned [mem 0x44000000-0x440003ff]
[    0.721329] pci 0000:00:1f.1: BAR 5: set to [mem 0x44000000-0x440003ff] (PCI address [0x44000000-0x440003ff]
[    0.721339] pci 0000:01:00.0: BAR 6: assigned [mem 0xe8120000-0xe813ffff pref]
[    0.721347] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.721353] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.721361] pci 0000:00:01.0:   bridge window [mem 0xe8100000-0xe81fffff]
[    0.721369] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf7ffffff pref]
[    0.721381] pci 0000:02:04.0: BAR 15: assigned [mem 0x40000000-0x43ffffff pref]
[    0.721389] pci 0000:02:04.0: BAR 16: assigned [mem 0x48000000-0x4bffffff]
[    0.721395] pci 0000:02:04.0: BAR 0: assigned [mem 0xe8206000-0xe8206fff]
[    0.721405] pci 0000:02:04.0: BAR 0: set to [mem 0xe8206000-0xe8206fff] (PCI address [0xe8206000-0xe8206fff]
[    0.721413] pci 0000:02:04.0: BAR 13: assigned [io  0x4400-0x44ff]
[    0.721420] pci 0000:02:04.0: BAR 14: assigned [io  0x4800-0x48ff]
[    0.721426] pci 0000:02:04.0: CardBus bridge to [bus 03-06]
[    0.721431] pci 0000:02:04.0:   bridge window [io  0x4400-0x44ff]
[    0.721439] pci 0000:02:04.0:   bridge window [io  0x4800-0x48ff]
[    0.721447] pci 0000:02:04.0:   bridge window [mem 0x40000000-0x43ffffff pref]
[    0.721455] pci 0000:02:04.0:   bridge window [mem 0x48000000-0x4bffffff]
[    0.721464] pci 0000:00:1e.0: PCI bridge to [bus 02-02]
[    0.721470] pci 0000:00:1e.0:   bridge window [io  0x4000-0x4fff]
[    0.721480] pci 0000:00:1e.0:   bridge window [mem 0xe8200000-0xe82fffff]
[    0.721488] pci 0000:00:1e.0:   bridge window [mem 0x40000000-0x43ffffff pref]
[    0.721518] pci 0000:00:1e.0: setting latency timer to 64
[    0.721662] pci 0000:02:04.0: power state changed by ACPI to D0
[    0.721728] pci 0000:02:04.0: power state changed by ACPI to D0
[    0.722103] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
[    0.722111] PCI: setting IRQ 9 as level-triggered
[    0.722120] pci 0000:02:04.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
[    0.722134] pci 0000:02:04.0: setting latency timer to 64
[    0.722145] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.722151] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[    0.722157] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.722163] pci_bus 0000:01: resource 1 [mem 0xe8100000-0xe81fffff]
[    0.722169] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff pref]
[    0.722175] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
[    0.722181] pci_bus 0000:02: resource 1 [mem 0xe8200000-0xe82fffff]
[    0.722187] pci_bus 0000:02: resource 2 [mem 0x40000000-0x43ffffff pref]
[    0.722193] pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
[    0.722198] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[    0.722204] pci_bus 0000:03: resource 0 [io  0x4400-0x44ff]
[    0.722210] pci_bus 0000:03: resource 1 [io  0x4800-0x48ff]
[    0.722216] pci_bus 0000:03: resource 2 [mem 0x40000000-0x43ffffff pref]
[    0.722222] pci_bus 0000:03: resource 3 [mem 0x48000000-0x4bffffff]
[    0.722327] NET: Registered protocol family 2
[    0.722469] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.723082] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.724886] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.725838] TCP: Hash tables configured (established 131072 bind 65536)
[    0.725848] TCP reno registered
[    0.725863] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.725895] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.726174] NET: Registered protocol family 1
[    0.726294] pci 0000:01:00.0: Boot video device
[    0.726337] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
[    0.726352] PCI: CLS 32 bytes, default 64
[    0.726795] Scanning for low memory corruption every 60 seconds
[    0.727117] audit: initializing netlink socket (disabled)
[    0.727149] type=2000 audit(1298976811.724:1): initialized
[    0.751127] highmem bounce pool size: 64 pages
[    0.751141] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.751515] VFS: Disk quotas dquot_6.5.2
[    0.751585] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.751877] msgmni has been set to 435
[    0.752227] alg: No test for stdrng (krng)
[    0.752361] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[    0.752372] io scheduler noop registered
[    0.752376] io scheduler deadline registered
[    0.752416] io scheduler cfq registered (default)
[    0.752843] pci-stub: invalid id string ""
[    0.754276] vesafb: framebuffer at 0xf0000000, mapped to 0xf8080000, using 3072k, total 32768k
[    0.754284] vesafb: mode is 1024x768x16, linelength=2048, pages=20
[    0.754289] vesafb: protected mode interface info at c000:547f
[    0.754295] vesafb: pmi: set display start = c00c5513, set palette = c00c555f
[    0.754299] vesafb: pmi: ports = 3010 3016 3054 3038 303c 305c 3000 3004 30b0 30b2 30b4
[    0.754315] vesafb: scrolling: redraw
[    0.754322] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[    0.755036] bootsplash 3.1.6-2004/03/31: looking for picture...
[    0.755047] bootsplash: silentjpeg size 157558 bytes
[    0.785015] bootsplash: ...found (1024x768, 80639 bytes, v3).
[    0.878898] Console: switching to colour frame buffer device 124x44
[    0.971564] fb0: VESA VGA frame buffer device
[    0.971698] isapnp: Scanning for PnP cards...
[    1.282287] isapnp: No Plug & Play device found
[    1.287163] Non-volatile memory driver v1.3
[    1.287172] Linux agpgart interface v0.103
[    1.287226] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    1.287363] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.288574] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.289326] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
[    1.289338] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
[    1.289353] serial 0000:00:1f.6: PCI INT B disabled
[    1.289531] Fixed MDIO Bus: probed
[    1.289640] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.294075] i8042.c: Detected active multiplexing controller, rev 1.1.
[    1.296699] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.296715] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.296722] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.296729] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.296735] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.297020] mice: PS/2 mouse device common for all mice
[    1.297329] cpuidle: using governor ladder
[    1.297336] cpuidle: using governor menu
[    1.551800] TCP cubic registered
[    1.551911] NET: Registered protocol family 10
[    1.552568] lo: Disabled Privacy Extensions
[    1.553088] Using IPI No-Shortcut mode
[    1.553386] PM: Checking image partition /dev/disk/by-id/ata-TOSHIBA_MK2018GAP_X2HA8014T-part1
[    1.563884] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.258684] Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9248b1, caps: 0x904713/0x4000/0x0
[    2.297279] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input1
[    2.304475] PM: Resume from disk failed.
[    2.304515] registered taskstats version 1
[    2.304763]   Magic number: 3:453:880
[    2.305074] Freeing unused kernel memory: 408k freed
[    2.305719] Write protecting the kernel text: 3852k
[    2.305792] Write protecting the kernel read-only data: 2600k
[    2.468146] SCSI subsystem initialized
[    2.515125] libata version 3.00 loaded.
[    2.548731] ata_piix 0000:00:1f.1: version 2.13
[    2.548758] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[    2.549180] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
[    2.549196] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 9 (level, low) -> IRQ 9
[    2.549287] ata_piix 0000:00:1f.1: setting latency timer to 64
[    2.549486] scsi0 : ata_piix
[    2.549740] scsi1 : ata_piix
[    2.552430] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1820 irq 14
[    2.552439] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1828 irq 15
[    2.716573] ata1.00: ATA-5: TOSHIBA MK2018GAP, M1.42 A, max UDMA/100
[    2.716582] ata1.00: 39070080 sectors, multi 16: LBA
[    2.716814] ata2.01: both IDENTIFYs aborted, assuming NODEV
[    2.717394] ata2.00: ATAPI: QSI CD-RW/DVD-ROM SBW-161, SX13, max UDMA/33
[    2.724477] ata1.00: configured for UDMA/100
[    2.724747] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK2018GA M1.4 PQ: 0 ANSI: 5
[    2.725356] ata2.00: configured for UDMA/33
[    2.726487] scsi 1:0:0:0: CD-ROM            QSI      DVD/CDRW SBW-161 SX13 PQ: 0 ANSI: 5
[    2.751781] Marking TSC unstable due to TSC halts in idle
[    2.752988] Switching to clocksource acpi_pm
[    2.780286] udev: starting version 157
[    2.928673] agpgart-intel 0000:00:00.0: Intel 845G Chipset
[    2.932819] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xec000000
[    2.999914] usbcore: registered new interface driver usbfs
[    2.999973] usbcore: registered new interface driver hub
[    3.137075] sd 0:0:0:0: [sda] 39070080 512-byte logical blocks: (20.0 GB/18.6 GiB)
[    3.137284] sd 0:0:0:0: [sda] Write Protect is off
[    3.137291] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.137386] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.137932]  sda: sda1 sda2 sda3
[    3.221102] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.401645] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    3.401681] rtc0: alarms up to one month, y3k, 242 bytes nvram
[    3.496174] [drm] Initialized drm 1.1.0 20060810
[    3.559949] usbcore: registered new device driver usb
[    3.577951] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.589163] uhci_hcd: USB Universal Host Controller Interface driver
[    3.589264] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
[    3.589284] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    3.589292] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    3.589348] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    3.589397] uhci_hcd 0000:00:1d.0: irq 9, io base 0x00001860
[    3.589484] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    3.589493] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.589499] usb usb1: Product: UHCI Host Controller
[    3.589504] usb usb1: Manufacturer: Linux 2.6.34-12-default uhci_hcd
[    3.589509] usb usb1: SerialNumber: 0000:00:1d.0
[    3.589806] hub 1-0:1.0: USB hub found
[    3.589820] hub 1-0:1.0: 2 ports detected
[    3.591262] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
[    3.591276] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 9 (level, low) -> IRQ 9
[    3.591298] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    3.591305] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.591347] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[    3.591395] uhci_hcd 0000:00:1d.1: irq 9, io base 0x000018c0
[    3.591479] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    3.591488] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.591494] usb usb2: Product: UHCI Host Controller
[    3.591499] usb usb2: Manufacturer: Linux 2.6.34-12-default uhci_hcd
[    3.591504] usb usb2: SerialNumber: 0000:00:1d.1
[    3.591817] hub 2-0:1.0: USB hub found
[    3.591834] hub 2-0:1.0: 2 ports detected
[    3.591990] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 9 (level, low) -> IRQ 9
[    3.592104] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    3.592113] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    3.592149] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[    3.592193] uhci_hcd 0000:00:1d.2: irq 9, io base 0x00001800
[    3.592272] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    3.592280] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.592286] usb usb3: Product: UHCI Host Controller
[    3.592291] usb usb3: Manufacturer: Linux 2.6.34-12-default uhci_hcd
[    3.592296] usb usb3: SerialNumber: 0000:00:1d.2
[    3.592589] hub 3-0:1.0: USB hub found
[    3.592605] hub 3-0:1.0: 2 ports detected
[    3.698295] [drm] radeon defaulting to kernel modesetting.
[    3.698302] [drm] radeon kernel modesetting enabled.
[    3.698407] radeon 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
[    3.702801] [drm] initializing kernel modesetting (RV200 0x1002:0x4C57).
[    3.704608] [drm] register mmio base: 0xE8100000
[    3.704615] [drm] register mmio size: 65536
[    3.706869] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
[    3.706885] [drm] 1 Power State(s)
[    3.706890] [drm] State 0 Default (default)
[    3.706893] [drm]    1 Clock Mode(s)
[    3.706898] [drm]            0 engine/memory: 230000/183000
[    3.706920] [drm] radeon: power management initialized
[    3.706938] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
[    3.706966] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[    3.707000] radeon 0000:01:00.0: putting AGP V2 device into 4x mode
[    3.707029] radeon 0000:01:00.0: GTT: 64M 0xEC000000 - 0xEFFFFFFF
[    3.707042] radeon 0000:01:00.0: VRAM: 64M 0xF0000000 - 0xF3FFFFFF (32M used)
[    3.707112] [drm] radeon: irq initialized.
[    3.707231] [drm] Detected VRAM RAM=64M, BAR=128M
[    3.707239] [drm] RAM width 64bits DDR
[    3.707380] [TTM] Zone  kernel: Available graphics memory: 446026 kiB.
[    3.707387] [TTM] Zone highmem: Available graphics memory: 515374 kiB.
[    3.707425] [drm] radeon: 32M of VRAM memory ready
[    3.707430] [drm] radeon: 64M of GTT memory ready.
[    3.707694] [drm] radeon: cp idle (0x00008383)
[    3.707777] [drm] Loading R100 Microcode
[    3.707785] platform radeon_cp.0: firmware: requesting radeon/R100_cp.bin
[    3.719673] [drm] radeon: ring at 0x00000000EC000000
[    3.719700] [drm] ring test succeeded in 1 usecs
[    3.726189] [drm] radeon: ib pool ready.
[    3.726360] [drm] ib test succeeded in 0 usecs
[    3.726591] [drm] Panel ID String: 1024x768               
[    3.726599] [drm] Panel Size 1024x768
[    3.726673] [drm] Default TV standard: NTSC
[    3.726678] [drm] 27.000000000 MHz TV ref clk
[    3.726685] [drm] Default TV standard: NTSC
[    3.726688] [drm] 27.000000000 MHz TV ref clk
[    3.726756] [drm] Radeon Display Connectors
[    3.726761] [drm] Connector 0:
[    3.726765] [drm]   VGA
[    3.726770] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[    3.726775] [drm]   Encoders:
[    3.726778] [drm]     CRT1: INTERNAL_DAC1
[    3.726783] [drm] Connector 1:
[    3.726786] [drm]   LVDS
[    3.726789] [drm]   Encoders:
[    3.726792] [drm]     LCD1: INTERNAL_LVDS
[    3.726796] [drm] Connector 2:
[    3.726799] [drm]   S-video
[    3.726802] [drm]   Encoders:
[    3.726806] [drm]     TV1: INTERNAL_DAC2
[    3.758586] [drm] fb mappable at 0xF0040000
[    3.758593] [drm] vram apper at 0xF0000000
[    3.758597] [drm] size 786432
[    3.758600] [drm] fb depth is 8
[    3.758604] [drm]    pitch is 1024
[    3.758618] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[    3.758666] Console: switching to colour dummy device 80x25
[    3.792772] Console: switching to colour frame buffer device 128x48
[    3.798693] fb0: radeondrmfb frame buffer device
[    3.798699] registered panic notifier
[    3.798712] [drm] Initialized radeon 2.3.0 20080528 for 0000:01:00.0 on minor 0
[    4.465839] PM: Marking nosave pages: 0000000000002000 - 0000000000010000
[    4.465849] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[    4.465856] PM: Basic memory bitmaps created
[    4.487167] PM: Basic memory bitmaps freed
[    4.627819] PM: Starting manual resume from disk
[    4.627829] PM: Resume from partition 8:1
[    4.627833] PM: Checking hibernation image.
[    4.628234] PM: Error -22 checking image file
[    4.628241] PM: Resume from disk failed.
[    4.917514] EXT4-fs (sda2): mounted filesystem with ordered data mode
[    8.270449] preloadtrace: systemtap: 1.1/0.147, base: f875b000, memory: 24data/38text/6ctx/13net/260alloc kb, probes: 34
[   10.632491] udev: starting version 157
[   10.835961] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   10.865258] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[   10.901126] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   11.036255] ACPI: Lid Switch [LID]
[   11.036418] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[   11.036579] ACPI: Power Button [PWRB]
[   11.036705] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[   11.036838] ACPI: Sleep Button [SLPB]
[   11.037010] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[   11.037144] ACPI: Power Button [PWRF]
[   11.097482] intel_rng: FWH not detected
[   11.190377] iTCO_vendor_support: vendor-support=0
[   11.193446] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[   11.193573] iTCO_wdt: Found a ICH3-M TCO device (Version=1, TCOBASE=0x1060)
[   11.193724] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   11.248396] i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
[   11.296252] input: PC Speaker as /devices/platform/pcspkr/input/input6
[   11.566438] ACPI: AC Adapter [ACAD] (off-line)
[   11.577248] ACPI: Battery Slot [BAT1] (battery present)
[   11.657721] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[   11.657729] e100: Copyright(c) 1999-2006 Intel Corporation
[   11.736631] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   11.736780] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[   11.823164] e100 0000:02:08.0: power state changed by ACPI to D0
[   11.823256] e100 0000:02:08.0: power state changed by ACPI to D0
[   11.840506] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9
[   11.840519] e100 0000:02:08.0: PCI INT A -> Link[LNKE] -> GSI 9 (level, low) -> IRQ 9
[   11.865338] e100 0000:02:08.0: PME# disabled
[   11.866302] e100: eth0: e100_probe: addr 0xe8205000, irq 9, MAC addr 00:02:3f:b1:18:ef
[   11.985053] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[   11.985064] Uniform CD-ROM driver Revision: 3.20
[   11.985319] sr 1:0:0:0: Attached scsi CD-ROM sr0
[   12.161241] wbsd: Winbond W83L51xD SD/MMC card interface driver
[   12.161249] wbsd: Copyright(c) Pierre Ossman
[   12.169661] Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
[   12.169704] Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
[   12.249648] ohci1394 0000:02:00.0: power state changed by ACPI to D0
[   12.250378] wbsd 00:0a: activated
[   12.255557] mmc0: W83L51xD id 7112 at 0x248 irq 10 FIFO PnP
[   12.258372] ohci1394 0000:02:00.0: power state changed by ACPI to D0
[   12.258388] ohci1394 0000:02:00.0: enabling device (0110 -> 0112)
[   12.258406] ohci1394 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
[   12.285341] FDC 0 is a post-1991 82077
[   12.314636] parport_pc 00:09: reported by Plug and Play ACPI
[   12.314698] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   12.316721] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[9]  MMIO=[e8204000-e82047ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[   12.322678] yenta_cardbus 0000:02:04.0: CardBus bridge found [1025:001e]
[   12.322710] yenta_cardbus 0000:02:04.0: O2: enabling read prefetch/write burst
[   12.360957] ALSA ac97_codec.c:2173: MC'97 1 converters and GPIO not ready (0xff00)
[   12.373184] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
[   12.373216] Intel ICH 0000:00:1f.5: setting latency timer to 64
[   12.448910] yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x0838, PCI irq 9
[   12.448919] yenta_cardbus 0000:02:04.0: Socket status: 30000007
[   12.448927] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06
[   12.448949] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [io  0x4000-0x4fff]
[   12.448958] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x4fff: excluding 0x4000-0x403f 0x4400-0x44ff 0x4800-0x48ff
[   12.455686] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0xe8200000-0xe82fffff]
[   12.455694] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe8200000-0xe82fffff: excluding 0xe8200000-0xe820ffff
[   12.455720] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0x40000000-0x43ffffff pref]
[   12.455727] pcmcia_socket pcmcia_socket0: cs: memory probe 0x40000000-0x43ffffff: excluding 0x40000000-0x43ffffff
[   12.570573] ppdev: user-space parallel port driver
[   12.687434] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x200-0x20f 0x248-0x24f 0x370-0x37f
[   12.690045] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3ff 0x4d0-0x4d7
[   12.691154] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[   12.692449] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[   12.693508] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xd8000-0xdffff 0xe4000-0xfffff
[   12.693805] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[   12.694094] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean.
[   12.694392] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[   12.948065] intel8x0_measure_ac97_clock: measured 55255 usecs (2656 samples)
[   12.948073] intel8x0: clocking to 48000
[   13.281247] Adding 1549308k swap on /dev/sda1.  Priority:-1 extents:1 across:1549308k
[   13.592369] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023f2a26000c05]
[   14.082437] device-mapper: uevent: version 1.0.3
[   14.084108] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[   14.307807] loop: module loaded
[   14.667262] EXT4-fs (sda3): mounted filesystem with ordered data mode
[   15.626060] fuse init (API version 7.13)
[   17.322288] type=1505 audit(1298973228.320:2): operation="profile_load" pid=923 name=/bin/ping
[   17.573438] type=1505 audit(1298973228.572:3): operation="profile_load" pid=1016 name=/sbin/klogd
[   17.846740] type=1505 audit(1298973228.844:4): operation="profile_load" pid=1028 name=/sbin/syslog-ng
[   18.071070] type=1505 audit(1298973229.068:5): operation="profile_load" pid=1040 name=/sbin/syslogd
[   18.349993] type=1505 audit(1298973229.348:6): operation="profile_load" pid=1041 name=/usr/sbin/avahi-daemon
[   18.556708] type=1505 audit(1298973229.556:7): operation="profile_load" pid=1042 name=/usr/sbin/identd
[   18.810258] type=1505 audit(1298973229.808:: operation="profile_load" pid=1043 name=/usr/sbin/mdnsd
[   19.095082] type=1505 audit(1298973230.092:9): operation="profile_load" pid=1044 name=/usr/sbin/nscd
[   19.517120] type=1505 audit(1298973230.516:10): operation="profile_load" pid=1045 name=/usr/sbin/ntpd
[   19.719783] type=1505 audit(1298973230.716:11): operation="profile_load" pid=1046 name=/usr/sbin/traceroute
[   24.009742] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   24.224327] ip_tables: (C) 2000-2006 Netfilter Core Team
[   24.314972] nf_conntrack version 0.5.0 (16105 buckets, 64420 max)
[   29.399087] powernow: This module only works with AMD K7 CPUs
[   37.639057] type=1503 audit(1298973248.636:12): operation="change_hat" info="unconfined" error=-1 pid=1451
[   37.639142] type=1503 audit(1298973248.636:13): operation="change_hat" info="unconfined" error=-1 pid=1451
[   42.387285] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[   44.506157] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   76.978226] bootsplash: status on console 0 changed to on
[  527.000190] e100: eth0 NIC Link is Up 100 Mbps Full Duplex
[  527.000579] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  527.542714] NET: Registered protocol family 17
[  536.660958] RPC: Registered udp transport module.
[  536.660966] RPC: Registered tcp transport module.
[  536.660971] RPC: Registered tcp NFSv4.1 backchannel transport module.
[  536.696793] Slow work thread pool: Starting up
[  536.698356] Slow work thread pool: Ready
[  536.698454] FS-Cache: Loaded
[  536.752452] FS-Cache: Netfs 'nfs' registered for caching
[  537.440050] eth0: no IPv6 routers present

[MrTom]

Die Netzwerkkarte scheint schon ziemlich alt zu sein, vielleicht unterstützt das openSuse das nicht richtig. Hast du die Möglichkeit nen anderes Linux drauf zu machen? Am besten wäre mal das ganze mit Ubunut und ner Live CD zu testen.

[custor86]

Die Netzwerkkarte scheint schon ziemlich alt zu sein, vielleicht unterstützt das openSuse das nicht richtig. Hast du die Möglichkeit nen anderes Linux drauf zu machen? Am besten wäre mal das ganze mit Ubunut und ner Live CD zu testen.

Ja der Rechner hat schon ein paar Jahre auf dem Buckel, ist schon um die 9-10 Jahre alt.

Mein Bruder hat aber noch angemerckt, dass das Problem auch mein toller Alice Router sein könnte.
Das gute stück hat mir schon einige Probleme bereitet * (an den MaC meiner Freundin denk)*. Ich bin nachher noch bei meinen Eltern zu besuch. Ich nehm den Laptop mal mit und stöpsel ihn mal dort in den Router.
Wenn es dort auch so langsam läuft dann probier ich mal Ubuntu drauf zu spielen.

[custor86]

Ich hab wieder Probleme mit meinem Linux Laptop.

Also mein erstes Problem hab ich jetzt in den Griff bekommen.
Ich hab es doch geschaft die Updates zu installieren.

Ich hab über Yast 2 mir die Updates einzeln anzeigen lassen.
Ich hab dann einfach die hälfte der Updates, abgewählt.
Es ging zwar noch immer übelst langsam (hat ca 6 Stunden gedauert), aber es hat geklappt.
Nachdem ich dann KDE auf den neusten Stand hatte, konnte ich einfach meine WLAN PCI Steckkarte installieren.

Jetzt lief der Laptop einige Tage jetzt hab ich aber plötzlich ein anders Problem.

Ich wollte mir noch ein paar Programme installieren. Wenn ich jetzt zu Yast gehe, werden erstamal meine Repositories auf Updates überprüft.
Dann kommt aber immer eine Fehlermeldung:

PackageKit Error repo-not-available: Failed to download /repodata/repomd.xml from http://download.opensuse.org/update/11.3/

Auch wenn ich dann neue Softwarepackete aus der Liste auswählen oder den Autoupdater ausführe kommt immer wieder diese Meldung.

Weiß einer von euch was da los ist?

[MrTom]

Das sind mit die schlimmsten Fehler die ich kenne. Wenn der Paketmanager nicht funktioniert kann man eigentlich gleich nochmal drüber nachdenken alles neu zu installieren
Ne ernsthaft jetzt ...
Deine Netzwerkverbindung ist aber vorhanden oder? Ohne an der URL etwas zu verändern, kann das eigentlich nur passieren wenn das Netz nicht vorhanden ist.
Ansonsten könntest du die Repositories nochmal neu hinzufügen. Bei der grafischen Oberfläche von YAST müssten irgendwo Paketquellen auswählbar sein oder so. Dort einfach die vorhandenen löschen und nochmal neu hinzufügen.

Was anderes fällt mir jetzt von der Ferne nicht ein.

[custor86]

Gute Neuigkeiten, das Problem scheint sich von selbst gelöst zu haben, ich hab es gerstern nochmal versucht und es hat alles problemlos aktualisiert.